#################
Board Build Notes
#################

***************
Current Version
***************

1.0.072 - Product Launch
========================
`0.0.69 accepted as Launch Design`

Changes and Modifications
-------------------------
* (F3) Fuse replaced with 500ma fuse from the origional 1000ma fuse, trip current was to high with sustained draw exceding volatge regulator it is meant to protect.

***************
Updates to Come
***************

##.0.000 - Currently in Design Process
======================================

Additions
---------
* Complete Layer Ground

Changes and Modifications
-------------------------
* Accessorie LED to white from orange

*****************
Previous Versions
*****************

0.0.069 - Release Candidate
===========================

Additions
---------
* Accessory LED Connection Exposed to Pin Header
* Addition of Silkscreen Graphics
* Placed QR Marker for Boards Tracking
* Switches Replaced with SMT Jumpers to reduce cost on parts & increase reliability

Changes and Modifications
-------------------------
* JP3 Added jump connection between 5v (-) Acc. & 5v (-) Reg. 
* LED connection polarity fixed
* Zenner Diode Polarity Fixed
* Swapping *F1* from componenet 0805L100WR-Little Fuse -> PTS08056V050-Eaton

0.0.055 - Beta
==============

Board Modification Required to Work
-----------------------------------
* LED Diodes need to be Installed in Reverse
* Zenner Diode Needs to be Installed in Reverse
* Jumper from 5v (-) Acc. to 5v (-) Reg on board
* Updated LEDs to 1206 size and non dual LED chips
* Zenner Diode SMT Footprint Corrected to 0805 Footprint

Changes and Modifications
-------------------------
* Change to larger LED as dual LED choosen was to small to hand place
* Updated resistor values for LED Connection

0.0.031 - Alpha
===============

################
Case Build Notes
################
A side project for when I get stuck and need to refresh my brain, this is a 3D printable part meant to happily hold the board in place and protect from the perils of falls, squishes, or shorts.

***************
Current Version
***************

0.0.008 - Alpha
===============

*****************
Previous Versions
*****************